[1] Adachi, J.I., Detournay, E., Peirce, A.P., 2010.Analysis of the Classical Pseudo-3D Model for Hydraulic Fracture with Equilibrium Height Growth across Stress Barriers.International Journal of Rock Mechanics and Mining Sciences, 47(4):625-639.doi: 10.1016/j.ijrmms.2010.03.008
[2] Biao, F.J., 2011.A Numerical Study on Horizontal Hydraulic Fracture Propagation (Dissertation).University of Science and Technology of China, Hefei (in Chinese with English abstract).
[3] Biot, M.A., 1955.Theory of Elasticity and Consolidation for a Porous Anisotropic Solid.Journal of Applied Physics, 26(2):182-185.doi: 10.1063/1.1721956
[4] Dean, R.H., Schmidt, J.H., 2009.Hydraulic-Fracture Predictions with a Fully Coupled Geomechanical Reservoir Simulator.SPE Journal, 14(4):707-714.doi: 10.2118/116470-pa
[5] Fan, T.Y., 2003.Fracture Theory Basis.Science Press, Beijing, 16-17 (in Chinese).
[6] Geertsma, J., De Klerk, F., 1969.A Rapid Method of Predicting Width and Extent of Hydraulically Induced Fractures.Journal of Petroleum Technology, 21(12):1571-1581.doi: 10.2118/2458-pa
[7] Karimi-Fard, M., Firoozabadi, A., 2003.Numerical Simulation of Water Injection in Fractured Media Using the Discrete-Fracture Model and the Galerkin Method.SPE Reservoir Evaluation & Engineering, 6(2):117-126.doi: 10.2118/83633-pa
[8] Khristianovic, S., Zheltov, Y., 1955.Formation of Vertical Fractures by Means of Highly Viscous Fluids.Processing 4th World Petroleum Congress, Rome.
[9] Kou, X.D., Zhou, W.Y., 2000.Using Element-Free Method to Trace Crack Propagation.Chinese Journal of Rock Mechanics and Engineering, 19(1):18-23 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-YSLX200001004.htm
[10] Nordgren, R.P., 1972.Propagation of a Vertical Hydraulic Fracture.Society of Petroleum Engineers Journal, 12(4):306-314.doi: 10.2118/3009-pa
[11] Perkins, T.K., Kern, L.R., 1961.Widths of Hydraulic Fractures.Journal of Petroleum Technology, 13(9):937-949.doi: 10.2118/89-pa
[12] Rahman, M.M., Rahman, M.K., 2010.A Review of Hydraulic Fracture Models and Development of an Improved Pseudo-3D Model for Stimulating Tight Oil/Gas Sand.Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 32(15):1416-1436.doi: 10.1080/15567030903060523
[13] Rice, J.R., 1968.A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks.Journal of Applied Mechanics, 35(2):379.doi: 10.1115/1.3601206
[14] Singh, K., Holditch, S.A., Ayers, W.B., 2008.Basin Analog Investigations Answer Characterization Challenges of Unconventional Gas Potential in Frontier Basins.Journal of Energy Resources Technology, 130(4):043202.doi: 10.1115/1.3000104
[15] Wang, H., 2013.A Numerical Study on Vertical Hydraulic Fracture Configuration and Fracture Height Control (Dissertation).University of Science and Technology of China, Hefei (in Chinese with English abstract).
[16] Wu, C.G., 2008.Hydraulics: Part Ⅰ, 4th Edition.Higher Education Press, Beijing, 143-146 (in Chinese).
[17] Zhang, B., Li, X., Wang, Y., et al., 2015.Current Status and Prospect of Computer Simulation Techniques of Hydraulic Fracturing in Oil and Gas Field.Journal of Engineering Geology, 23(2):301-310 (in Chinese with English abstract). http://www.gcdz.org/EN/abstract/abstract11683.shtml
[18] Zhou, F.Q., Shi, A.F., Wang, X.H., 2014.An Efficient Finite Difference Model for Multiphase Flow in Fractured Reservoirs.Petroleum Exploration and Development, 41(2):262-266.doi: 10.1016/s1876-3804(14)60031-8
[19] 彪仿俊, 2011. 水力压裂水平裂缝扩展的数值模拟研究(博士学位论文). 合肥: 中国科学技术大学. http://cdmd.cnki.com.cn/Article/CDMD-10358-1011124961.htm
[20] 范天佑, 2003.断裂理论基础.北京:科学出版社, 16-17.
[21] 寇晓东, 周维垣, 2000.应用无单元法追踪裂纹扩展.岩石力学与工程学报, 19(1): 18-23. http://www.cnki.com.cn/Article/CJFDTOTAL-SLXB200601010.htm
[22] 王瀚, 2013. 水力压裂垂直裂缝形态及缝高控制数值模拟研究(博士学位论文). 合肥: 中国科学技术大学. http://cdmd.cnki.com.cn/Article/CDMD-10358-1013244689.htm
[23] 吴持恭, 2008.水力学:上册.北京:高等教育出版社, 143-146.
[24] 张搏, 李晓, 王宇, 等, 2015.油气藏水力压裂计算模拟技术研究现状与展望.工程地质学报, 23(2): 301-310. http://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ201502017.htm