库车褶皱冲断带克拉苏三角带的位移转换构造

杨明慧; 金之钧; 吕修祥; 孙冬胜

库车褶皱冲断带克拉苏三角带的位移转换构造

杨明慧^{1, 2},
金之钧³,
吕修祥^{1, 2},
孙冬胜^{1, 2}

1.
石油大学盆地与油藏研究中心, 北京 102249
2.
石油天然气成藏机理教育部重点实验室, 北京 102249
3.
中国石化石油勘探开发研究院, 北京 100083

基金项目:

国家“十五”重点科技攻关项目 2001BA605A-02-03-03-04

详细信息

作者简介:
杨明慧(1962-), 男, 副教授, 主要从事盆地构造分析方面的研究

中图分类号: P54
计量
- 文章访问数: 3731
- HTML全文浏览量: 430
- PDF下载量: 3
- 被引次数: 0
出版历程
- 收稿日期: 2003-06-22
- 刊出日期: 2004-03-25

Displacement Transfer Zone of Kelasu Triangle Zone, Kuqa Thrust-and-Fold Belts in Tarim Basin

1.
Basin & Reservoir Research Center, University ofPetroleum, Beijing 102249, China
2.
Key Laboratory for Hydrocarbon Accumulation, Ministry ofEducation, Beijing 102249, China
3.
Exploration & Production Research Institute, SEPRI, Beijing 100083, China

摘要

摘要: 根据对库车褶皱冲断带的地面地质调查和地震反射剖面的解释表明, 库车褶皱冲断带克拉苏三角带发育垂直构造走向的位移转换构造.在地面上, 位移转换构造分别表现为库姆格列木、巴什基奇克和开依雷艾肯背斜以及吐孜麻扎、喀桑托开和吉迪克背斜构造的走向侧接构造样式; 在地下表现为库-巴冲断层、喀桑托开冲断层的断距的反接关系.位移转换构造发育的动力学背景可能与南天山重力滑动构造有关.
- 位移转换构造 /
- 克拉苏三角带 /
- 库车褶皱冲断带 /
- 塔里木盆地
Abstract: The field observation and seismic data interpretation reveal that the displacement transfer zone is developed in the Kelasu triangle zone, Kuqa thrust-and-fold belts. The displacement transfer zone appears as relay ramps of the Kumugeliemu anticlines, Bashijiqike anticlines, Kaiyileiaiken anticlines to the north and Tuzimazha anticlines, Kasangtuokai anticlines, and Jidike anticlines to the south on the surface, respectively. Under the subsurface, it appears as throw deviation of Kumugeliemu-Bashijiqike thrusts and Kasangtuokai thrusts. Its dynamic occurrence may be related to the gravitational slide structures along the southern Chinese Tianshan front ranges.
- displacement transfer zone /
- Kelasu triangle zone /
- Kuqa thrust-and-fold belt /
- Tarim basin

HTML全文

图 1 库车褶皱冲断带克拉苏三角带构造位置

阴影为库车褶皱冲断带, 其中小方框为本文研究区

Fig. 1. Location of Kelasu triangle zone in Kuqa thrust-and-fold belts, Tarim basin

下载: 全尺寸图片幻灯片

图 2 库车褶皱冲断带克拉苏构造带地质图

1.前三叠系; 2.三叠系; 3.侏罗系; 4.白垩系; 5.库姆格列木群; 6.苏维依组; 7.吉迪克组; 8.康村组; 9.库车组; 10.西域组; 11.更新统-全新统; 12.断层; 13.褶皱(背斜、向斜); 14.地层界线; 15.位移转换构造发育位置; 16.钻井; ①卡赞齐向斜; ②库姆格列木背斜; ③巴什基奇克背斜; ④图舍科依向斜; ⑤吐孜麻扎背斜; ⑥喀桑托开背斜

Fig. 2. Geological map of Kelasu triangle zone in Kuqa thrust-and-fold belts, Tarim basin

下载: 全尺寸图片幻灯片

图 3 构造横剖面解释(剖面位置见图 4)

Fig. 3. Structural cross sections based on seismic interpretation

下载: 全尺寸图片幻灯片

图 4 克拉苏地区构造分层偏移

1.构造等值线; 2.冲断层; 3.地面褶皱(喀桑托开背斜、图舍科依向斜) 轴向; 4.钻井

Fig. 4. Structure contour map on top of Bashijiqike Formation, Kelasu area

下载: 全尺寸图片幻灯片

图 5 平衡剖面的序列恢复(KC-Z60)

a.侏罗-白垩纪; b.库姆格列木期; c.苏维依期; d.吉迪克期; e.康村期; f.库车期; 现今构造样式见图 4中的KC-Z60, 剖面阴影为后期被侵蚀殆尽的地层

Fig. 5. Sequential palinspastic restorations of balanced cross sections (KC-Z60)

下载: 全尺寸图片幻灯片

图 6 南天山山前三叠系(a) 和侏罗系(b) 中发育的浅层重力滑动构造

Fig. 6. Gravitational slide structures showing in Triassic (a) and Jurassic (b), south Tianshan mountains front ranges

下载: 全尺寸图片幻灯片

图 7 克拉苏地区断层的倾向背离(显示2个冲断层之间的位移转换关系)

实心正方形、三角形分别为喀桑托开冲断层和库-巴冲断层的断距

Fig. 7. Dip-separation diagram of Kelasu area, illustrating inverse relationship in displacement between Kasangtuokai anticline and Kumugeliemu-Bashijiqike anticlines indicative of displacement transfer

下载: 全尺寸图片幻灯片

参考文献(33)

Banks, C.J., Warburton, J., 1986. " Passive-roof" duplex geometry in the frontal structures of the Kirthar and Sulaiman mountain belts, Pakistan. J. Structural Geology, 8: 229-237. doi: 10.1016/0191-8141(86)90045-3
Charlesworth, H. A. K., Gagnon, L. G., 1985. Intercutaneous wedges, the triangle zone and structural thickening of the Mynheer coal seam at Coal Valley in the Rocky Mountain foothills of central Alberta. Bulletin of Canadian Petroleum Geology, 33: 22-30.
Chen, S.P., 2002. Cenozoic salt tectonics origin and evolution in the western Kuqa foreland area(Dissertation). University of Petroleum, Beijing, 58-65(in Chinese with English abstract).
Dahlstrom, C.D.A., 1969. Balanced cross sections. Canadian Journal ofEarth Sciences, 6: 743-757. doi: 10.1139/e69-069
Dahlstrom, C.D.A., 1970. Structural geology in the eastern margin of the Canadian Rocky Mountains. Bulletin of Canadian Petroleum Geology, 18: 332-406.
Goldburg, B.L., 1984. Displacement transfer between thrust faults near the Sun River in the Sawtooth Range, northwestern Montana. In: McBane, J.D., Garrison, P.B., eds., Northwestern Montana and adjacent Canada. Montana Geological Society 1984 Field Conference and Symposium, 211-220.
Gordy, P.L., Frey, F.R., 1975. Structural cross sections through the foothillswest of Calgary. In: Evers, H.J., Thorpe, J.E., eds., Geology of the foothills between Savanna Creek and Panther River, Southwestern Alberta, Canada. Canadian Society of PetroleumGeologists and Canadian Society of Exploration Geophysicists, 37-64.
Gwinn, V.E., 1964. Thin-skinned tectonics in the plateau and northwestern valley and ridge provinces of the central Appalachians. Geological Society of American Bull., 75: 863900.
Jia, C.Z., He, D.F., Lei, Z.Y., et al., 2000. Oil and gas exploration of foreland thrust zone. Petroleum Industry Press, Beijing (in Chinese).
Jones, P.B., 1982. Oil and gas beneath east-dipping underthrust faults in the Alberta foothills, Canada. In: Powers, R.B., ed., Geologic studies of the Cordilleran thrust belt, 1.
Liu, H.F., 2001. Geodynamics scenario of coupled basin and mountain system. Earth Science—Journal of China University of Geosciences, 26(6): 581-596(in Chinese with English abstract).
Liu, H.F., Liang, H.S., Cai, L.G., et al., 1994. The structural style and foreland basin evolution of the foreland thrust system on the south and north sides of the Tianshan mountain. Earth Science—Journal ofChina University ofGeosciences, 19(6): 727-741(in Chinese with English abstract).
Lu, H.F., Chen, C.M., Liu, Z.H., et al., 2000. The structural features and origin of the Kuqa rejuvenation foreland thrust belt. Acta Petrolei. Sinica, 21(3): 18-24(in Chinese with English abstract).
McMechan, M.E., 1985. Low-taper triangle zone geometry: An interpretation for the Rocky Mountain foothills, Pine Pass-Peace River area, British Columbia. Bulletin ofCanadian Petroleum Geology, 33: 31-38.
Mitra, S., 2002. Fold-accommodation faults. AAPG Bull., 86(4): 671-693.
Morley, C.K., 1986. A classification of thrust front. AAPG Bull., 70: 12-25.
O'keefe, F.X., Stearns, D.W., 1982. Characteristics of displacement transfer zones associated with thrustfaults. In: Powers, R. B., ed., Geologic studies of the Cordilleran thrust belt: Rocky Mountain Association of Geologists, 1: 219-233.
Ramos, V.A., 1989. Andean foothills structures in northern Magallanes basin, Argentina. AAPG Bull., 73(7): 887-903.
Sanderson, D.A., Spratt, D.A., 1992. Triangle zone and displacement transfer structures in the eastern Front Ranges, southern Canadian Rocky Mountains. AAPG Bull., 76(6): 828-839.
Teal, P.R., 1983. The triangle zone at Cabin Creek, Alberta. In: Bally, A.W., ed., Seismic expression of structural style. AAPG Studies in Geology Series 15, 3: 48-53.
Thompson, R.I., 1981. The nature and significance of large blind thrusts within the northern Rocky Mountains of Canada. In: McClay, K.R., Price, N.J., eds., Thrust and nappe tectonics. Geological Society ofLondon(Special Publication), 9: 449462.
Vann, I.R., Graham, R.H., Hayward, A.B., 1986. The structure of mountain fronts. J. Structural Geology, 8(3-4): 215-227. doi: 10.1016/0191-8141(86)90044-1
Yang, M.H., 2002. The structural characteristics of thrust-and-fold belt in intracontinental foreland basin: A case study from Kuqa depression in Tarim basin, China. University of Petroleum, Beijing(in Chinese with English abstract).
Yang, M.H., Jin, Z.J., Lǜ, X.X., et al., 2000. Kelasu triangle zone and its hydrocarbon potential in Kuqa thrust-and-fold belts, Tarim basin(northwestern China). Earth Science—Journal ofChina University ofGeosciences, 27(6): 745-750(in Chinese with English abstract).
Zhu, Z.C., 1991. Thrust and nappe tectonics. China University of Geosciences Press, Wuhan(in Chinese with English abstract).
陈书平, 2002. 库车前陆区西段新生代盐构造形成和演化(博士论文). 北京: 石油大学, 58-65.
贾承造, 何登发, 雷振宇, 等, 2000. 前陆冲断带油气勘探. 北京: 石油工业出版社.
刘和甫, 2001. 盆地-山岭耦合体系与地球动力学机制. 地球科学——中国地质大学学报, 26(6): 581-596. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX200106004.htm
刘和甫, 梁慧社, 蔡立国, 等, 1994. 天山两侧前陆冲断系构造样式与前陆盆地演化. 地球科学——中国地质大学学报, 19(6): 727-741. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX199406004.htm
卢华复, 陈楚铭, 刘志宏, 等, 2000. 库车再生前陆逆冲带的构造特征与成因. 石油学报, 21(3): 18-24. doi: 10.3321/j.issn:0253-2697.2000.03.004
杨明慧, 2002. 陆内前陆盆地褶皱冲断带构造特征——以塔里木盆地库车坳陷为例. 北京: 石油大学.
杨明慧, 金之钧, 吕修祥, 等, 2000. 库车褶皱冲断带克拉苏三角带及其油气潜力. 地球科学——中国地质大学学报, 27(6): 745-750. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX200206016.htm
朱志澄, 1991. 逆冲推覆构造. 武汉: 中国地质大学出版社.