Dynamic Construction and Uncertainty Assessment for 3D Coal-Seam Models in Northern Dongsheng Coalfield
-
摘要: 以内蒙古东胜煤田北部艾来五库沟-台吉召地段勘查区为例，针对三维地质建模方法在多源多类地质数据应用、动态建模及建模结果不确定性评估等方面存在的不足进行研究，并实现了煤层三维建模.煤层三维建模要领是：先按照数据的内在逻辑关系和几何结构两个层次进行数据融合处理，将钻孔、剖面及断层等数据转化为形式简单、结构一致的离散化样品数据；再以这些数据和各类边界线为基础，通过距离幂次反比(inverse distance weighting，IDW)法插值得到煤层顶底板高程，并结合这些属性值和TIN(triangulated irregular network)剖分技术动态生成煤层结构模型；然后利用一个与煤层顶底板高程估值结果相对应的算子——插值方差，完成对煤层模型的局部不确定性评估.详细讨论了煤层三维建模的整体流程并基于三维地学信息系统平台QuantyView加以实现.实际应用结果表明，所提方法具有显著的实际应用价值.Abstract: This paper explores three issues related with the current coal-seam modeling, namely, integration of multi-source geological data, dynamic modeling and uncertainty assessment for the modeling results by studying 3D coal-seam modeling of five prospect areas from Ailaiwukugou to Taijizhao located in northern Dongsheng coalfield in Inner Mongolia. Firstly, data integration is carried out according to its inherent logic and outer geometrical relationship. The former translates data into sections or profiles, and the latter further converts them into a uniform simple format, which is called uniform discretized samples. Secondly, based on these samples and boundary lines, inverse distance weighting (IDW) method is employed to evaluate the height of both top and base floor of coal layer and then 3D coal models are dynamically built according to these attribute values by triangulated irregular network (TIN). Thirdly, interpolation variance, an alternative uncertainty measurement for IDW estimates, is applied to assess uncertainty of the resulting 3D coal-seam models. Finally, the whole modeling workflow is discussed in detail and implemented based upon a 3D geo-information system named QuantyView. In the application in our study area, the proposed method works well in dynamically modeling the coal layers and their uncertainties in multi-source geological data environment, which shows that it is practical and feasible for 3D modeling in other coalfields.
-
图 1 勘查区各地段边界及区内主要勘探工程和断层的相对位置关系
a.各勘查区及段层面的空间位置及形态；b.钻孔及剖面数据的空间分布情况
Fig. 1. Borderlines of the exploration areas and its relative position relationship of the exploration engineering and fault structures
图 2 多源多类地质数据融合过程中真实折剖面的透视图(a)及正视图(b)示意
Fig. 2. A typical multi-source and multi-type geological data integration illustrated by a true zigzag section in perspective (a) and front (b) view
图 3 断层线数据的提取及在建模过程中的应用说明
a.典型的正断层及其上下盘煤层；b.剖面上一个煤层的断层线数据提取结果；c.空间上多个煤层的断层线数据提取结果；d.断层影响下的煤层底板多边形构建结果；e.断层影响下的煤层顶底面模型构建结果；f.断层影响下的煤层体模型构建结果
Fig. 3. Illustrations on generation of fault sample data and its application on coal-seam modeling
图 4 基于顶、底板高程估值结果的煤层边界线动态生成(a)及煤层结构模型动态构建(b)过程示意
Fig. 4. Illustrations on dynamically constructing coal-seam borderline and the respective structure models based on elevation estimates of coal seam roof and floor
图 5 多源地质数据环境下煤层动态建模及其不确定性评估方法的整体实现流程
Fig. 5. The workflow of the proposed method for dynamic modeling coal seams and evaluating the uncertainty under multi-source geological data condition
-
Bistacchi, A., Massironi, M., Dal Piaz, G.V., et al., 2008.3D Fold and Fault Reconstruction with an Uncertainty Model: An Example from an Alpine Tunnel Case Study. Computers & Geosciences, 34(4): 351-372. doi: 10.1016/j.cageo.2007.04.002 He, Z.W., 2008. Key Techniques of Three-Dimensional Dynamic Modeling in Geological Space (Dissertation). Huazhong University of Science and Technology, Wuhan, 173 (in Chinese with English abstract). Huang, X.L., Liang, G.K., Ma, F.Z., et al., 2011. Sedimentary System and Coal Accumulation Characteristics in Northern Dongsheng Coalfield. Coal Geology of China, 23(7): 1-6 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-ZGMT201107002.htm Jiang, Z.B., 2006. Dynamic Modelling Technology of Coal Seam and Its Application. Journal of China Coal Society, 31(1): 40-44 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-MTXB200601008.htm Lemon, A.M., Jones, N.L., 2003. Building Solid Models from Boreholes and User-Defined Cross-Sections. Computers & Geosciences, 29(5): 547-555. doi: 10.1016/S0098-3004(03)00051-7 Li, S.H., Wu, C.L., Tian, Y.P., et al., 2006.3D Visual Modeling of Listric Faults and Vector Cut. Chinese Journal of Rock Mechanics and Engineering, 25(Suppl. 2): 3841-3846 (in Chinese with English abstract). http://www.cnki.com.cn/Article/CJFDTotal-YSLX2006S2078.htm Li, Z.L., Wu, C.L., Zhang, X.L., et al., 2011a. Dynamical Constructing the Solid Model for an Ore-Body with Refined Attributes. Journal of China University of Mining & Technology, 40(6): 990-994 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-ZGKD201106027.htm Li, Z.L., Wu, C.L., Zhang, X.L., et al., 2011b. Key Technologies and Development of a 3D Coal Geological Modeling Information System. Journal of China Coal Society, 36(7): 1117-1123 (in Chinese with English abstract). Lindsay, M.D., Aillères, L., Jessell, M.W., et al., 2012. Locating and Quantifying Geological Uncertainty in Three-Dimensional Models: Analysis of the Gippsland Basin, Southeastern Australia. Tectonophysics, 546-547: 10-27. doi: 10.1016/j.tecto.2012.04.007 Mao, S.J., 2002. Gray Geographical Information System—The Theory and Technology of Correct Geological Spatial Data Dynamically. Acta Scicentiarum Naturalium Universitatis Pekinensis, 38(4): 556-562 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-BJDZ200204021.htm Nie, H.G., Dong, F.C., Zhao, W.K., et al., 2011. Coal-Bearing Strata Sequence Stratigraphic Features and Coal Accumulation Pattern Analysis in Dongsheng Coalfield—A Case Study of Abuhai Exploration Area in Dongsheng Coalfield. Coal Geology of China, 23(2): 10-16 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTotal-ZGMT201102005.htm Pierre, G., 1997. Geostatistics for Natural Resources Evaluation. Oxford University Press, New York, 483. Qu, H.G., 2006. Three-Dimensional Geological Surface Modeling from Intersected Folded Cross-Sections. Acta Geodaetica et Cartographica Sinica, 35(4): 411 (in Chinese). http://d.wanfangdata.com.cn/Periodical_chxb200604023.aspx Sun, X.J., 2011. Division and Correlation of Jurassic Yan'an Formation in Dongsheng Coalfield, Chaideng Prospecting Region (Dissertation). Shandong University of Science and Technology, Qingdao, 55 (in Chinese with English abstract). Tian, Y.P., Liu, H.B., Liu, G., et al., 2000. Vector Cut Principle and Method for 3-D Tectonic-Stratigraphic Basin Framework. Earth Science—Journal of China University of Geosciences, 25(3): 306-310 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTotal-DQKX200003016.htm Wu, C.L., 1998. Development and Applications of Geological and Mineral Resources Point-Source Information System (GMPIS). Earth Science—Journal of China University of Geosciences, 23(2): 193-198 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-DQKX802.018.htm Wu, C.L., He, Z.W., Weng, Z.P., et al., 2011. Property, Classification and Key Technologies of Three-Dimensional Geological Data Visualization. Geological Bulletin of China, 30(5): 642-649 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-ZQYD201105003.htm Wu, C.L., Liu, G., Tian, Y.P., et al., 2005. Geoview: A Computer-Aided System for Informatization of Geological and Mineral Resources Survey and Exploration Works. Proceedings of IAMG'05: GIS and Spatial Analysis, Toronto, 2: 958-963. Wu, C.L., Liu, G., Tian, Y.P., et al., 2005a. Discussion on Geological Information Science. Geological Science and Technology Information, 24(3): 1-8 (in Chinese with English abstract). Wu, C.L., Liu, G., Tian, Y.P., et al., 2005b. Theory and Method Problems of Informatization of Geological Surveying and Mineral Resource Exploration. Earth Science—Journal of China University of Geosciences, 30(3): 359-365 (in Chinese with English abstract). http://www.researchgate.net/publication/292724751_Theory_and_method_problems_of_informatization_of_geological_surveying_and_mineral_resource_exploration Wu, C.L., Mao, X.P., Tian, Y.P., et al., 2006. Digital Basins and Their 3-D Visualization Modeling. Geological Science and Technology Information, 25(4): 1-8 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-DZKQ200604001.htm Wu, L.X., Shi, W.Z., 2005. On Three Dimensional Geosciences Spatial Modeling. Geography and Geo-Information Science, 21(1): 1-4 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-DLGT200501001.htm Wu, Q., Xu, H., Zou, X.K., 2005. An Effective Method for 3D Geological Modeling with Multi-Source Data Integration. Computers & Geosciences, 31(1): 35-43. doi: 10.1016/j.cageo.2004.09.005 Yamamoto, J.K., 2000. An Alternative Measure of the Reliability of Ordinary Kriging Estimates. Mathematical Geology, 32(4): 489-509. doi: 10.1023/A:1007577916868 Zanchi, A., Francesca, S., Stefano, Z., et al., 2009.3D Reconstruction of Complex Geological Bodies: Examples from the Alps. Computers & Geosciences, 35(1): 49-69. doi: 10.1016/j.cageo.2007.09.003 Zhang, X.L., Wu, C.L., Weng, Z.P., et al., 2010. Research and Application of the Digital Mine Software QuantyMine. Earth Science—Journal of China University of Geosciences, 35(2): 302-310 (in Chinese with English abstract). doi: 10.3799/dqkx.2010.031 Zhu, L.F., Pan, X., Wu, X.C., et al., 2008. Construction Method and Actualizing Techniques of 3D Visual Model for Geological Faults. Journal of Software, 19(8): 2004-2017 (in Chinese with English abstract). doi: 10.3724/SP.J.1001.2008.02004 Zhu, L.F., Wu, X.C., Pan, X., 2009. Theory of Accuracy Assessment and Methods for Error Correction in 3D Geological Structure Models. Earth Science Frontiers, 16(4): 363-371 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-DXQY200904042.htm 何珍文, 2008. 地质空间三维动态建模关键技术研究(博士学位论文). 武汉: 华中科技大学, 173. 黄晓丽, 梁官考, 马飞宙, 等, 2011. 东胜煤田北部延安组沉积体系及聚煤特征. 中国煤炭地质, 23(7): 1-6. doi: 10.3969/j.issn.1674-1803.2011.07.01 姜在炳, 2006. 煤层动态建模技术及应用. 煤炭学报, 31(1): 40-44. doi: 10.3321/j.issn:0253-9993.2006.01.009 李绍虎, 吴冲龙, 田宜平, 等, 2006. 铲状断层三维可视化建模及矢量剪切. 岩石力学与工程学报, 25(增刊2): 3841-3846. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2006S2078.htm 李章林, 吴冲龙, 张夏林, 等, 2011a. 带精细属性特征的矿体实体模型动态构建方法. 中国矿业大学学报, 40(6): 990-994. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGKD201106027.htm 李章林, 吴冲龙, 张夏林, 等, 2011b. 煤炭三维地质建模信息系统的研制及关键技术. 煤炭学报, 36(7): 1117-1123. https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB201107010.htm 毛善君, 2002. 灰色地理信息系统——动态修正地质空间数据的理论和技术. 北京大学学报(自然科学版), 38(4): 556-562. doi: 10.3321/j.issn:0479-8023.2002.04.018 聂浩刚, 董福辰, 赵维宽, 等, 2011. 东胜煤田含煤岩系层序地层特征与聚煤规律分析——以东胜煤田阿不亥煤炭勘查区为例. 中国煤炭地质, 23(2): 10-16. doi: 10.3969/j.issn.1674-1803.2011.02.03 屈红刚, 2006. 基于交叉折剖面的3维地质表面建模方法研究. 测绘学报, 35(4): 411. doi: 10.3321/j.issn:1001-1595.2006.04.023 孙希杰, 2011. 东胜煤田柴登勘查区侏罗系延安组地层划分与对比研究(硕士论文). 青岛: 山东科技大学, 55. 田宜平, 刘海滨, 刘刚, 等, 2000. 盆地三维构造-地层格架的矢量剪切原理及方法. 地球科学——中国地质大学学报, 25(3): 306-310. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX200003016.htm 吴冲龙, 1998. 地质矿产点源信息系统的开发与应用. 地球科学——中国地质大学学报, 23(2): 193-198. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX802.018.htm 吴冲龙, 何珍文, 翁正平, 等, 2011. 地质数据三维可视化的属性、分类和关键技术. 地质通报, 30(5): 642-649. doi: 10.3969/j.issn.1671-2552.2011.05.003 吴冲龙, 刘刚, 田宜平, 等, 2005a. 论地质信息科学. 地质科技情报, 24(3): 1-8. doi: 10.3969/j.issn.1000-7849.2005.03.001 吴冲龙, 刘刚, 田宜平, 等, 2005b. 地矿勘查工作信息化的理论与方法问题. 地球科学——中国地质大学学报, 30(3): 359-365. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX200503013.htm 吴冲龙, 毛小平, 田宜平, 等, 2006. 三维数字盆地构造——地层格架模拟技术. 地质科技情报, 25(4): 1-8. https://www.cnki.com.cn/Article/CJFDTOTAL-DZKQ200604001.htm 吴立新, 史文中, 2005. 论三维地学空间构模. 地理与地理信息科学, 21(1): 1-4. doi: 10.3969/j.issn.1672-0504.2005.01.001 张夏林, 吴冲龙, 翁正平, 等, 2010. 数字矿山软件(QuantyMine)若干关键技术的研发和应用. 地球科学——中国地质大学学报, 35(2): 302-310. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX201002015.htm 朱良峰, 潘信, 吴信才, 等, 2008. 地质断层三维可视化模型的构建方法与实现技术. 软件学报, 19(8): 2004-2017. https://www.cnki.com.cn/Article/CJFDTOTAL-RJXB200808014.htm 朱良峰, 吴信才, 潘信, 2009. 三维地质结构模型精度评估理论与误差修正方法研究. 地学前缘, 16(4): 363-371. doi: 10.3321/j.issn:1005-2321.2009.04.036 -
下载:
点击查看大图
图(6)
计量
- 文章访问数: 3140
- HTML全文浏览量: 717
- PDF下载量: 468
- 被引次数: 0
