Well Bore Stability Technology Using Blocking Drilling Fluid System Suitable for the Deep High Temperature Cracked Strata in Well Songke-2
-
摘要: 为了解决松科2井深部高温高压严重龟裂型硬质散岩成井困难的问题，结合力学分析计算、实物模拟实验，明确了封堵环厚度影响因素；经过合理遴选组配，验证了细粒高强度骨架与耐高温软质悬浮体作为随钻泥浆封堵剂的封堵效果；对现场作业压力进行了计算和针对性控制.建立了三颗粒桥组骨架自锁楔卡的力学模型，推导出了单个桥组的抗破坏能力公式.相比于基浆，乳化沥青、氧化沥青、磺化沥青能够使得高温高压失水量降低率达到56%、44%和48%.颗粒尺寸及强度、裂缝宽度、压差等因素均对封堵环的厚度具有重要影响，而刚性封堵剂重晶石、超细碳酸钙和可变形封堵粒子乳化沥青的复配使用，可起到快速封堵效果.基于上述分析和试验，配合现场技术对钻进作业中的井内压力进行了有效控制，实现了适度正向压差下的挤扶防塌功效.籍此，获得了五开井段（5 910~7 018 m）裸眼钻进井壁稳定的重要保障条件.Abstract: To solve the problem of drilling in severely cracked hard rock in deep high temperature and high pressure (HTHP) stratum of Well Songke-2, mechanical analysis and physical simulation experiment were used to clarify the factors affecting the thickness of the plugging layer in this study. The sealing effect of high-strength skeleton particles and HT deformable soften particles was verified through HTHP filtration test, and the on-site operation pressure was calculated and controlled. The self-locking mechanical model of the three-particle bridge group skeleton was established, and the anti-destructive ability formula of the single bridge group was derived. Compared with the blank formula, emulsified asphalt, oxidized asphalt and sulfonated asphalt can reduce the HTHP water loss volume by 56%, 44% and 48%, respectively. Particle size and strength, crack width and pressure difference have important influence on the thickness of the plugging layer. A quick blocking effect can be achieved by combining the rigid plugging agent with deformable plugging particles. Based on the above analysis and tests, the drilling pressure in the operation was effectively controlled in conjunction with the on-site technology, and the compaction and anti-collapse effect under moderate positive pressure difference was realized. With the techniques mentioned above, the fifth spud of Well Songke-2 was completed successfully with the open-hole section from 5 910 to 7 018 m.
-
Key words:
- cracked strata /
- plugging agent /
- bridge plug /
- positive pressure difference /
- drag reduction /
- engineering geology
-
图 1 松科2井深部碎块岩石（心径92 mm）
Fig. 1. Deep cracked rock in Well Songke-2 (core diameter 92 mm)
图 4 沥青类封堵剂对高温高压失水量的影响
Fig. 4. Effect of asphalt plugging agent on high temperature and high pressure water loss
图 5 复配封堵剂对高温高压失水量的影响
Fig. 5. Effect of compound plugging agent on high temperature and high pressure water loss
-
Bai, Y. R., Shang, X. S., Wang, Z. B., et al., 2018. Experimental Study of Low Molecular Weight Polymer/nanoparticle Dispersed Gel for Water Plugging in Fractures. Colloids and Surfaces A:Physicochemical and Engineering Aspects, 551:95-107. https://doi.org/10.1016/j.colsurfa.2018.04.067 Chen, X. J., 2007. Development and Utilization of Limestone. Liaoning Building Materials, (8):51-53 (in Chinese with English abstract). Feng, Z. Q., Wang, C. S., Graham, S., et al., 2013. Continental Scientific Drilling Project of Cretaceous Songliao Basin:Scientific Objectives and Drilling Technology. Palaeogeography, Palaeoclimatology, Palaeoecology, 385:6-16. https://doi.org/10.1016/j.palaeo.2012.03.016 Hou, H. S., Wang, C. S., Zhang, J. D., et al., 2018. Deep Continental Scientific Drilling Engineering in Songliao Basin:Progress in Earth Science Research. Geology in China, 45(4):641-657 (in Chinese with English abstract). http://www.zhangqiaokeyan.com/academic-journal-cn_chinese-geology-english_thesis/0201272277292.html Huang, J. J., Li, J. X., Wu, L., et al., 2011. Research on the Sealing Property of Polymeric Alcohol. Drilling & Production Technology, 34(6):86-88 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-ZCGY201106032.htm Li, C., Shen, L. N., 2018. Design and Application of Long Servce Life Bit in Hard Rock Drilling for "SK-Ⅱ" Well. Exploration Engineering (Rock & Soil Drilling and Tunneling), 45(2):56-60 (in Chinese with English abstract). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=tkgc201802013 Li, J. F., 2013. Theoretical Mechanics. Tsinghua University Press, Beijing. Li, S. L., Song, S. G., 2018. Cementing Technology for Ultra-High Temperature Well Songke-2. Drilling Fluid & Completion Fluid, 35(2):92-97 (in Chinese with English abstract). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zjyywjy201802015 Li, S. Z., 1980. Drilling Technology. Geological Publishing House, Beijing. Oriji, A. B., Zakka, S. B., 2013. Effects of Thickening Time on the Application of Cement Slurry for High Pressure/High Temperature Drilling. Innovative Systems Design & Engineering, 4(3):32-40. Pernites, R. B., Santra, A. K., 2016. Portland Cement Solutions for Ultra-High Temperature Wellbore Applications. Cement and Concrete Composites, 72:89-103. https://doi.org/10.1016/j.cemconcomp.2016.05.018 Salim, P., Amani, M., 2013. Special Considerations in Cementing High Pressure High Temperature Wells. International Journal of Engineering and Applied Sciences, 1(4):120-143. http://www.researchgate.net/publication/294694810_Special_considerations_in_cementing_high_pressure_high_temperature_wells Santarelli, F. J., Dahen, D., Baroudi, H., et al., 1992. Mechanisms of Borehole Instability in Heavily Fractured Rock Media. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 29(5):457-467. https://doi.org/10.1016/0148-9062(92)92630-u Shang, F. Y., Hu, F., Su, X. H., 2015. Present Status and Development Prospect of Precipitated Barium Sulfate Production in China. Inorganic Chemicals Industry, 47(1):1-4 (in Chinese with English abstract). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=wjygy201501001 Sun, Y. H., Zhang, F. Y., Wang, Q. Y., et al., 2016. Application of "Crust 1" 10k Ultra-Deep Scientific Drilling Rig in Songliao Basin Drilling Project (CCSD-SKII). Journal of Petroleum Science and Engineering, 145:222-229. https://doi.org/10.1016/j.petrol.2016.04.003 Wang, B., Zhou, F. J., Zou, Y. S., et al., 2019. Quantitative Investigation of Fracture Interaction by Evaluating Fracture Curvature during Temporarily Plugging Staged Fracturing. Journal of Petroleum Science and Engineering, 172:559-571. https://doi.org/10.1016/j.petrol.2018.08.038 Wu, X. M., Cai, J. H., Hu, Y. L., 2014. Drilling Fluid and Geotechnical Slurry Material. China University of Geosciences Press, Wuhan (in Chinese). Wu, Y., Wang, Z. M., Zhu, K. L., et al., 2017. Preparation and Performance Evaluation of High-Temperature Cationic Emulsified Asphalt for Drilling Fluid. Fault-Block Oil and Gas Field, 24(5):719-722 (in Chinese with English abstract). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dkyqt201705027 Yang, Y. Y., 2014. Laboratory Study on the Polymer Flexible Cement Slurry System. Advances in Petroleum Exploration and Development, 7(2):68-75. https://doi.org/10.3968/5157 Zhang, Y., Liu, Y., 2003. Research on Applying Elastic Graphite to Drilling Fluid. Natural Gas Industry, 23(1):42-44 (in Chinese with English abstract). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=trqgy200301012 Zhao, J. H., Zou, C. C., Fu, H. C., et al., 2017. Pore Structure Characterization of the Cretaceous Quantou Formation:Results from Microresistivity Imaging Logs in the Second Scientific Drilling Borehole (SK-2 East Borehole) Songliao Basin, Northeast China. Journal of Petroleum Science and Engineering, 159:915-926. https://doi.org/10.1016/j.petrol.2017.09.067 Zheng, W. L., Wu, X. M., Zhu, Y. Y., et al., 2015. Drilling Fluid Technique for Special Drilling Technology in SK-2 Well. Oil Drilling & Production Technology, 37(3):32-35 (in Chinese with English abstract). http://www.en.cnki.com.cn/Article_en/CJFDTOTAL-SYZC201503008.htm Zhu, Y. Y., Wang, W. S., Zhang, H. C., et al., 2018. Implementation Overview of Chinese Continental Scientific Drilling (CCSD) Project and Technical Systems of Core Boring. Acta Geologica Sinica, 92(10):1971-1984 (in Chinese with English abstract). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dizhixb201810001 陈喜军, 2007.浅谈石灰岩及其开发利用.辽宁建材, (8):51-53. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=lnjc200708027 侯贺晟, 王成善, 张交东, 等, 2018.松辽盆地大陆深部科学钻探地球科学研究进展.中国地质, 45(4):641-657. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zgdizhi201804002 黄进军, 李家学, 吴兰, 等, 2011.聚合醇封堵性能室内研究.钻采工艺, 34(6):86-88. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zcgy201106027 李春, 沈立娜, 2018."松科二井"用硬岩长寿命钻头的设计与应用, 探矿工程(岩土钻掘工程), 45(2):56-60. http://www.zhangqiaokeyan.com/academic-journal-cn_exploration-engineering-rock-soil-drilling-tunneling_thesis/0201215998973.html 李俊峰, 2013.理论力学.北京:清华大学出版社. 李韶利, 宋韶光, 2018.松科2井超高温水泥浆固井技术.钻井液与完井液, 35(2):92-97. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zjyywjy201802015 李世忠, 1980.钻探工艺学.北京:地质出版社. 尚方毓, 胡昉, 苏小红, 2015.浅谈国内沉淀硫酸钡生产现状及发展趋势.无机盐工业, 47(1):1-4. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=wjygy201501001 乌效鸣, 蔡记华, 胡郁乐, 2014.钻井液与岩土工程浆液.武汉:中国地质大学出版社. 吴艳, 王在明, 朱宽亮, 等, 2017.钻井液用抗高温阳离子乳化沥青的研制与性能评价.断块油气田, 24(5):719-722. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dkyqt201705027 张琰, 刘艳, 2003.弹性石墨在钻井液中的应用研究.天然气工业, 23(1):42-44. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=trqgy200301012 郑文龙, 乌效鸣, 朱永宜, 等, 2015.松科2井特殊钻进工艺下钻井液技术.石油钻采工艺, 37(3):32-35. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=syzcgy201503008 朱永宜, 王稳石, 张恒春, 等, 2018.我国大陆科学钻探工程实施概况及其取心钻进技术体系.地质学报, 92(10):1971-1984. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dizhixb201810001 -
下载:
点击查看大图
图(6)
计量
- 文章访问数: 903
- HTML全文浏览量: 705
- PDF下载量: 39
- 被引次数: 0
