含复杂倒转的地层层序统一修正与连接方法

花卫华; 郭丹阳; 刘修国; 朱玉华; 张文; 宿紫莹

doi:10.3799/dqkx.2022.201

Volume 48 Issue 4

Apr. 2023

Turn off MathJax

Article Contents

Article Navigation > Earth Science > 2023 > 48(4): 1532-1542

Hua Weihua, Guo Danyang, Liu Xiuguo, ZhuYuhua, Zhang Wen, Su Ziying, 2023. Unified Correction and Connection Method of Stratigraphic Sequence with Complex Inversion. Earth Science, 48(4): 1532-1542. doi: 10.3799/dqkx.2022.201

Citation:

Hua Weihua, Guo Danyang, Liu Xiuguo, ZhuYuhua, Zhang Wen, Su Ziying, 2023. Unified Correction and Connection Method of Stratigraphic Sequence with Complex Inversion. Earth Science, 48(4): 1532-1542. doi: 10.3799/dqkx.2022.201

Citation:

PDF( 3995 KB)

Unified Correction and Connection Method of Stratigraphic Sequence with Complex Inversion

doi: 10.3799/dqkx.2022.201

School of Geography and Information Engineering, China University of Geosciences, Wuhan 430078, China

Received Date: 2022-04-09
Publish Date: 2023-04-25

Abstract

Abstract

In the process of 3D geological model construction, due to the phenomena of stratum inversion, fold and joint caused by complex geological structure movement, the traditional stratum connection method does not consider the stratum corresponding to adjacent boreholes, which leads to the 3D model construction error. According to the problem, it puts forward a kind of complex stratigraphic sequence and unified revision and connection methods, introducing logic recursive unified stratigraphic sequence of ideas, drilling through stratigraphic math discriminant rule interpolation based on reverse calculation of layer thickness of zero insertion position, so as to unify all the drilling stratigraphic sequence and the revised standard stratigraphic sequence, inverted in the borehole, loss, repeated problems for processing. The results show that this method can fully solve the ambiguity of zero thickness layer insertion position and the ambiguity of reversed formation determination through the discussion of complex formation structures such as stratum missing, inversion and duplication and experimental verification. The algorithm can effectively solve complex stratum inversion and provide scientific basis for stratum connection in 3D geological modeling.
- 3D modeling,
- recursively unified stratigraphic sequence,
- stratigraphic inversion,
- logic drilling,
- mathematical models

FullText(HTML)

References(39)

References

Che, D. F. , Jia, Q. R. , 2019. Three-Dimensional Geological Modeling of Coal Seams Using Weighted Kriging Method and Multi-Source Data. IEEE Access, 7: 118037-118045. https://doi.org/10.1109/ACCESS.2019.2936811

Chen, B. , Zhu, Y. B. , Zhang, Y. , 2020. Research on EVS-Based 3D Geological Modeling. High Speed Railway Technology, 11(6): 6-10, 18(in Chinese with English abstract).

Dai, Y. , Dai, W. J. , 2022. Three-Dimensional Geological Modeling Based on Surfer FLAC3D and Its Verification. Geotechnical Investigation & Surveying, 50(3): 43-46(in Chinese with English abstract).

Du, Z. C. , Liu, Z. , Ming, W. H. , et al. , 2019. Unified Stratigraphic Sequence Method for Three Dimensional Urban Geological Modeling. Rock and Soil Mechanics, 40(S1): 259-266(in Chinese with English abstract).

Guo, J. T. , Wang, X. , Wang, J. , et al. , 2021. Three-Dimensional Geological Modeling and Spatial Analysis from Geotechnical Borehole Data Using an Implicit Surface and Marching Tetrahedra Algorithm. Engineering Geology, 284: 106047. https://doi.org/10.1016/j.enggeo.2021.106047

Hou, W. S. , Liu, H. G. , Zheng, T. C. , et al. , 2021. Hierarchical MPS-Based Three-Dimensional Geological Structure Reconstruction with Two-Dimensional Image(s). Journal of Earth Science, 32(2): 455-467. https://doi.org/10.1007/s12583-021-1443-x

Jia, L. , 2021. Research on 3D Geological Modeling Based on GOCAD. Inner Mongolia Coal Economy, (7): 190-191(in Chinese with English abstract). doi: 10.3969/j.issn.1008-0155.2021.07.094

Kim, M. , Kim, H. S. , Chung, C. K. , 2020. A Three-Dimensional Geotechnical Spatial Modeling Method for Borehole Dataset Using Optimization of Geostatistical Approaches. KSCE Journal of Civil Engineering, 24(3): 778-793. https://doi.org/10.1007/s12205-020-1379-1

Li, J. , Wang, X. Y. , Liu, P. R. , et al. , 2022. Three-Dimensional Geological Hybrid Interpolation Method Combining Boreholes and Geological Sections. Journal of Zhengzhou University (Natural Science Edition), 54(3): 1-9(in Chinese with English abstract).

Li, L. , Liu, X. G. , Wu, W. B. , 2018. Key Technology of 3D Stratum Modelling Based on Borehole Data. Rock and Soil Mechanics, 39(3): 1056-1062(in Chinese with English abstract).

Li, N. , Li, C. B. , Chu, W. K. , et al. , 2021. Uncertainty Visualisation of a 3D Geological Geometry Model and Its Application in GIS-Based Mineral Resource Assessment: A Case Study in Huayuan District, Northwestern Hunan Province, China. Journal of Earth Science, 32(2): 358-369. https://doi.org/10.1007/s12583-021-1434-y

Liu, L. , Yang, Z. , 2019. Comparative Study on Spatial Interpolation Methods of 3D Geological Modeling Based on Borehole Data. Energy Technology and Management, 44(3): 162-164(in Chinese with English abstract). doi: 10.3969/j.issn.1672-9943.2019.03.063

Liu, X. , Li, J. X. , Hu, L. T. , 2021.3D Geological Modeling of Complex Geological Mining Area Based on Multi-Source Data Fusion. Geotechnical Investigation & Surveying, 49(12): 35-39(in Chinese with English abstract).

Liu, Z. , Zhang, Z. L. , Zhou, C. Y. , et al. , 2021. An Adaptive Inverse-Distance Weighting Interpolation Method Considering Spatial Differentiation in 3D Geological Modeling. Geosciences, 11(2): 51. https://doi.org/10.3390/geosciences11020051

Tang, B. Y. , Wu, C. L. , Li, X. C. , et al. , 2015. A Fast Progressive 3D Geological Modeling Method Based on Borehole Data. Rock and Soil Mechanics, 36(12): 3633-3638(in Chinese with English abstract).

Wang, B. , He, K. , Zhong, D. Y. , 2021. Automatic Construction Method of Constraint Rules for Implicit Modeling of Geological Bodies Based on Borehole Data. Gold Science and Technology, 29(3): 345-354(in Chinese with English abstract).

Wang, J. Y. , Cheng, Y. Y. , Ma, S. , et al. , 2021. City 3D Geological Model Based on Virtual Boreholes. Geotechnical Investigation & Surveying, 49(6): 46-52(in Chinese with English abstract).

Xi, L. , Ni, Y. G. , He, J. , et al. , 2022. Three-Dimensional Geological Modeling and Resource Estimation of the Marine Sand and Gravel Orebodies Based on GMS. Geology and Exploration, 58(2): 429-441(in Chinese with English abstract).

Yang, B. , Hu, H. F. , Zhao, P. F. , et al. , 2015. Multivariate Data-Based 3D Geological Modeling Study. Geology of Anhui, 25(4): 298-300, 317(in Chinese with English abstract). doi: 10.3969/j.issn.1005-6157.2015.04.013

Zhong, D. Y. , Wang, L. G. , Bi, L. , 2020. Extended Hermite Radial Basis Functions for Sparse Contours Interpolation. IEEE Access, 8: 58752-58762. https://doi.org/10.1109/ACCESS.2020.2982802

Zhong, D. Y. , Wang, L. G. , Lin, B. I. , et al. , 2019a. Implicit Modeling of Complex Orebody with Constraints of Geological Rules. Transactions of Nonferrous Metals Society of China, 29(11): 2392-2399. https://doi.org/10.1016/s1003-6326(19)65145-9

Zhong, D. Y. , Zhang, J. , Wang, L. G. , 2019b. Fast Implicit Surface Reconstruction for the Radial Basis Functions Interpolant. Applied Sciences, 9(24): 5335. https://doi.org/10.3390/app9245335

Zhong, P. , 2017. Research on 3D Geological Modeling Technology and Application Based on Virtual Drilling Technology. Modern Informationn Technology, 1(3): 100-101(in Chinese with English abstract). doi: 10.3969/j.issn.2096-4706.2017.03.041

Zou, J. C. , Hu, J. K. , Li, J. Y. , 2021. Research on 3D Geological Modeling of Mines Based on 3D Mine. Mineral Exploration, 12(3): 718-724(in Chinese with English abstract). doi: 10.3969/j.issn.1674-7801.2021.03.026

陈兵, 朱泳标, 张燕, 2020. 基于EVS的三维地质建模研究. 高速铁路技术, 11(6): 6-10, 18. https://www.cnki.com.cn/Article/CJFDTOTAL-GSTL202006002.htm

戴粤, 戴吾蛟, 2022. 基于Surfer平台的FLAC3D三维地质建模方法与模型验证. 工程勘察, 50(3): 43-46. https://www.cnki.com.cn/Article/CJFDTOTAL-GCKC202203007.htm

杜子纯, 刘镇, 明伟华, 等, 2019. 城市级三维地质建模的统一地层序列方法. 岩土力学, 40(增刊1): 259-266. https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX2019S1039.htm

贾龙, 2021. 基于GOCAD的三维地质建模研究. 内蒙古煤炭经济, (7): 190-191. doi: 10.3969/j.issn.1008-0155.2021.07.094

李健, 王心宇, 刘沛溶, 等, 2022. 融合钻孔与地质剖面的三维地质混合插值方法. 郑州大学学报(理学版), 54(3): 1-9. https://www.cnki.com.cn/Article/CJFDTOTAL-ZZDZ202203001.htm

李璐, 刘新根, 吴蔚博, 2018. 基于钻孔数据的三维地层建模关键技术. 岩土力学, 39(3): 1056-1062. https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201803035.htm

刘乐, 杨智, 2019. 基于钻孔数据的三维地质建模空间插值方法的对比研究. 能源技术与管理, 44(3): 162-164. https://www.cnki.com.cn/Article/CJFDTOTAL-JSMT201903064.htm

刘鑫, 李季秀, 胡立堂, 2021. 基于多源数据融合的复杂地质矿区三维地质建模. 工程勘察, 49(12): 35-39. https://www.cnki.com.cn/Article/CJFDTOTAL-GCKC202112007.htm

唐丙寅, 吴冲龙, 李新川, 等, 2015. 一种基于钻孔地质数据的快速递进三维地质建模方法. 岩土力学, 36(12): 3633-3638. https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201512037.htm

王博, 贺康, 钟德云, 2021. 基于钻孔数据的地质体隐式建模约束规则自动构造方法. 黄金科学技术, 29(3): 345-354. https://www.cnki.com.cn/Article/CJFDTOTAL-HJKJ202103004.htm

王甲怡, 成远湲, 马莎, 等, 2021. 基于虚拟钻孔的城市三维地质模型构建方法. 工程勘察, 49(6): 46-52. https://www.cnki.com.cn/Article/CJFDTOTAL-GCKC202106010.htm

习龙, 倪玉根, 何健, 等, 2022. 基于GMS软件的海砂矿体三维地质建模和资源量估算. 地质与勘探, 58(2): 429-441. https://www.cnki.com.cn/Article/CJFDTOTAL-DZKT202202017.htm

杨波, 胡海风, 赵鹏飞, 等, 2015. 基于多元数据的三维地质建模研究. 安徽地质, 25(4): 298-300, 317. https://www.cnki.com.cn/Article/CJFDTOTAL-AHDZ201504014.htm

钟频, 2017. 基于虚拟钻孔技术的三维地质建模应用研究. 现代信息科技, 1(3): 100-101. https://www.cnki.com.cn/Article/CJFDTOTAL-XDXK201703042.htm

邹进超, 胡加昆, 李金勇, 2021. 基于3Dmine的矿山三维地质建模研究. 矿产勘查, 12(3): 718-724. https://www.cnki.com.cn/Article/CJFDTOTAL-YSJS202103026.htm

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(10) / Tables(2)

Get Citation

PDF

XML

Article views (1278) PDF downloads(58)

Unified Correction and Connection Method of Stratigraphic Sequence with Complex Inversion

doi: 10.3799/dqkx.2022.201

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Proportional views

Export File

Citation

Format

Content