固液侵入条件下智能堵漏钻井液剪切增稠响应特性研究

孙平贺; 邓盈盈; 曹函; 杨浩宇; 黄小程; 赵冬鹏; 王亮

doi:10.3799/dqkx.2026.102

Volume 51 Issue 8

Aug. 2026

Turn off MathJax

Article Contents

Article Navigation > Earth Science > 2026 > 51(8): 3170-3180

Sun Pinghe, Deng Yingying, Cao Han, Yang Haoyu, Huang Xiaocheng, Zhao Dongpeng, Wang Liang, 2026. Research on the Shear Thickening Response Characteristics of Intelligent Plugging Drilling Fluid under Solid-Liquid Invasion Conditions. Earth Science, 51(8): 3170-3180. doi: 10.3799/dqkx.2026.102

Citation:

Sun Pinghe, Deng Yingying, Cao Han, Yang Haoyu, Huang Xiaocheng, Zhao Dongpeng, Wang Liang, 2026. Research on the Shear Thickening Response Characteristics of Intelligent Plugging Drilling Fluid under Solid-Liquid Invasion Conditions. Earth Science, 51(8): 3170-3180. doi: 10.3799/dqkx.2026.102

Citation:

Sun Pinghe, Deng Yingying, Cao Han, Yang Haoyu, Huang Xiaocheng, Zhao Dongpeng, Wang Liang, 2026. Research on the Shear Thickening Response Characteristics of Intelligent Plugging Drilling Fluid under Solid-Liquid Invasion Conditions. Earth Science, 51(8): 3170-3180. doi: 10.3799/dqkx.2026.102

PDF( 12273 KB)

Research on the Shear Thickening Response Characteristics of Intelligent Plugging Drilling Fluid under Solid-Liquid Invasion Conditions

doi: 10.3799/dqkx.2026.102

Sun Pinghe^{1, 2, 3
,
,},
Deng Yingying^{1, 2, 3},
Cao Han^{1, 2, 3
,
,
,},
Yang Haoyu^{1, 2, 3},
Huang Xiaocheng^{1, 2, 3},
Zhao Dongpeng^{1, 4},
Wang Liang^{1, 5}

1.
School of Geosciences and Info-Physics, Central South University, Changsha 410083, China
2.
Key Laboratory of Non-Ferrous Resources and Geological Hazard Detection, Changsha 410083, China
3.
Key Laboratory of Metallogenic Prediction of Nonferrous Metals and Geological Environment Monitoring(Central South University), Ministry of Education, Changsha 410083, China
4.
Zhengzhou Shangyou Material Technology Corporation Limited, Zhengzhou 450000, China
5.
Power China Zhongnan Engineering Corporation Limited, Changsha 410083, China

Received Date: 2026-03-12
Publish Date: 2026-08-25

Abstract

Abstract

Drilling fluid loss results in significant material wastage and can lead to severe accidents such as borehole instability. To elucidate the effects of formation clay minerals and water intrusion on the shear thickening response of smart plugging drilling fluids, shear thickening fluids (STFs) were prepared using nano-silica and polyethylene glycol (PEG). The nano-silica was characterized by SEM, nitrogen adsorption-desorption and the balance bottle method.The STFs were characterized via squeeze flow and steady-state shear tests. Experiments were designed involving the intrusion of illite, kaolinite, and montmorillonite at concentrations of 0, 1.8%, 3.6%, 5.4%, and 7.2%, as well as water intrusion at 0, 2%, 4%, 6%, and 8%. The results indicate that the intrusion of kaolinite and illite reduced the maximum viscosity of the STF by 79.8% and 72.9%, respectively, due to the interlayer slippage effect. In contrast, the intrusion of 5.4% montmorillonite increased the thickening intensity of the STF by 56.4%. However, 8% water intrusion significantly diluted and inhibited the thickening characteristics of the STF, causing a 99.6% decrease in shear thickening intensity. This study provides a theoretical reference for the application of shear-thickening-based smart plugging drilling fluids.
- smart materials,
- shear thickening fluid,
- plugging,
- rheology,
- clay minerals,
- drilling

FullText(HTML)

References(45)

References

Bai, Y. R., Sun, J. S., Lv, K. H., et al., 2019. Preparation and Application of Shear-Responsive Plugging. Gel. CN109825269(in Chinese).

Bao, D., Qiu, Z. S., Qiu, W. Q., et al., 2019. Experiment on Properties of Lost Circulation Materials in High Temperature Formation. Acta Petrolei Sinica, 40(7): 846-857(in Chinese with English abstract).

Brady, J. F., Bossis, G., 1985. The Rheology of Concentrated Suspensions of Spheres in Simple Shear Flow by Numerical Simulation. Journal of Fluid Mechanics, 155: 105-129. https://doi.org/10.1017/s0022112085001732

Chen, Q., He, Q. Y., Liu, M., etal., 2016. Mechanical Properties and Mechanism of Shear Thickening Fluid. Chinese Journal of Solid Mechanics, 37(6): 518-537(in Chinese).

Cheng, X., McCoy, J. H., Israelachvili, J. N., et al., 2011. Imaging the Microscopic Structure of Shear Thinning and Thickening Colloidal Suspensions. Science, 333(6047): 1276-1279. https://doi.org/10.1126/science.1207032

Deng, Y. Y., Sun, P. H., Xia, Y., et al., 2024. Experimental Study on the Sealing Characteristics of Fractured Formation by Shear Thickening Fluid. Drilling Engineering, 51(5): 68-76(in Chinese with English abstract).

Du, S. R., Liu, Y. Q., Fan, Y. Z., et al., 2022. Influence of the Dispersibility of Fumed Silica on the Steady-State Rheological Property of STF. New Chemical Materials, 50(4): 220-224(in Chinese with English abstract).

Hao, Y. X., Yin, C., Li, Y. Z., et al., 2025. Evaluation of Fracturing Effect and Mechanism of Casing Deformation Weakening for Ultra-Long Section Fracturing. Earth Science, 50(12): 4751-4763(in Chinese with English abstract).

Hu, C. F., Jiang, J. Y., Cai, J. C., et al., 2025. Research Progress on Aggregation Behavior Mechanism and Inhibition Methods of Nanomaterials Modified Polymers. Plastics Science and Technology, 53(11): 195-201(in Chinese with English abstract).

Kang, Y. L., Zhang, J. Y., Xu, C. Y., et al., 2018. The Effect of Geometrical Morphology of Rigid Lost Circulation Materialon Its Retention Behavior in Fractures. Petroleum Drilling Techniques, 46(5): 26-34(in Chinese with English abstract).

Lee, Y. S., Wagner, N. J., 2006. Rheological Properties and Small-Angle Neutron Scattering of a Shear Thickening, Nanoparticle Dispersion at High Shear Rates. Industrial & Engineering Chemistry Research, 45(21): 7015-7024. https://doi.org/10.1021/ie0512690

Li, G. R., Liu, Z. D., Zhang, J. H., et al., 2016. A Plugging Agent Containing Shape-Memory Alloy, CN201611203356.0(in Chinese).

Li, W., Bai, Y. R., Li, Y. T., et al., 2021. Research and Application Progress of Drilling Fluid Lost Circulation Materials and Technical Countermeasures for Lost Circulation Control. Science Technology and Engineering, 21(12): 4733-4743(in Chinese with English abstract).

Lin, J. M., Chen, Y., Min, S. N., et al., 2025. Effect of Nanowire Doping and Rheological Viscosity on Novel Design of Highly Concentrated Shear Thickening Fluid for Stabbing Resistant Composites. Composites Part B: Engineering, 303: 112601. https://doi.org/10.1016/j.compositesb.2025.112601

Liu, S., Zhao, C., Wen, Z. C., 2025. Impact Protection Performance of Kevlar Fabric Composites Impregnated with Modified Multiphase Shear Thickening Fluids. Thin-Walled Structures, 214: 113399. https://doi.org/10.1016/j.tws.2025.113399

Liu, Z. D., Li, H. B., Sun, T. F., et al., 2025. Plugging Performance of Shape Memory Foam Sealing Material with High Activation Temperature. Oilfield Chemistry, 42(3): 388-392(in Chinese with English abstract).

Negi, A. S., Osuji, C. O., 2009. New Insights on Fumed Colloidal Rheology-Shear Thickening and Vorticity-Aligned Structures in Flocculating Dispersions. Rheologica Acta, 48(8): 871-881. https://doi.org/10.1007/s00397-008-0341-9

Serra, G. F., Oliveira, L., Gürgen, S., et al., 2024. Shear Thickening Fluid (STF) in Engineering Applications and the Potential of Cork in STF-Based Composites. Advances in Colloid and Interface Science, 327: 103157. https://doi.org/10.1016/j.cis.2024.103157

Sun, J. S., Bai, Y. R., Cheng, R. C., et al., 2021. Research Progress and Prospect of Plugging Technologies for Fractured Formation with Severe Lost Circulation. Petroleum Exploration and Development, 48(3): 732-743. https://doi.org/10.1016/S1876-3804(21)60059-9

Sun, J. S., Lei, S. F., Bai, Y. R., et al., 2020. Research Progress and Application Prospects of Smart Materials in Lost Circulation Control of Drilling Fluids. Journal of China University of Petroleum(Edition of Natural Science), 44(4): 100-110(in Chinese with English abstract).

Sun, X. C., Li, Y. Q., Zhan, X. F., etal., 2014. Preparation and Properties of Shear Thickening Fluid. Journal of Textile Research, 35(8): 5-9(in Chinese with English abstract).

Tan, Z. J., Deng, J. H., Zhang, X. Q., et al., 2023. Quantitative Characterization of Fractures under Volcanic Thermal Expansion Based on Thermal-Mechanical Coupling Analysis. Earth Science, 48(7): 2665-2677(in Chinese with English abstract).

Tang, L. H., Wang, Y. L., Zhang, C. B., etal., 2022. Preparationand Evaluationof Thermosensitive Plugging Materials Basedon Shape Memory Polymers. Petroleum Drilling Techniques, 50(5): 70-75(in Chinese with English abstract).

Yan, B. C., Jiang, G. C., Hu, W. J., et al., 2019. Study on High Temperature Delayed Crosslinking PAM Gel LCM. Drilling Fluid & Completion Fluid, 36(6): 679-682(in Chinese with English abstract).

Yang, J. Y., Zhang, J. S., Wang, B. C., et al., 2025. Constitutive Modeling of Shear Thickening Fluid Using Continuum Mechanics. International Journal of Mechanical Sciences, 289: 110057. https://doi.org/10.1016/j.ijmecsci.2025.110057

Zarei, M., Aalaie, J., 2020. Application of Shear Thickening Fluids in Material Development. Journal of Materials Research and Technology, 9(5): 10411-10433. https://doi.org/10.1016/j.jmrt.2020.07.049

Zhao, C. Y., Gong, X. L., Wang, S., et al., 2020. Shear Stiffening Gels for Intelligent Anti-Impact Applications. Cell Reports Physical Science, 1(12): 100266. https://doi.org/10.1016/j.xcrp.2020.100266

Zhou, H., Tan, Z. H., 2021. Study on the Influence of Graphene on the Squeeze Flow Mechanical Properties of Shear Thickening Fluid. Materials Science and Technology, 29(01): 66-73(in Chinese with English abstract).

白英睿, 孙金声, 吕开河, 等, 2019. 剪切响应型凝胶堵漏剂及其制备方法与应用, CN109825269.

暴丹, 邱正松, 邱维清, 等, 2019. 高温地层钻井堵漏材料特性实验. 石油学报, 40(7): 846-857.

陈潜, 何倩云, 刘梅, 等, 2016. 剪切增稠液的力学性能与机理. 固体力学学报, 37(6): 518-537.

邓盈盈, 孙平贺, 夏余宏烨, 等, 2024. 剪切增稠流体对裂隙地层的封堵特性试验研究. 钻探工程, 51(5): 68-76.

杜苏睿, 刘亚青, 樊益泽, 等, 2022. 气相二氧化硅分散性对剪切增稠液体稳态流变学性能的影响. 化工新型材料, 50(4): 220-224.

郝越翔, 尹陈, 李宜真, 等, 2025. 页岩超长段压裂模式效果评价及套变弱化机制. 地球科学, 50(12): 4751-4763. doi: 10.3799/dqkx.2025.178

胡昌富, 蒋金云, 蔡建臣, 等, 2025. 纳米材料改性聚合物团聚行为机理及抑制方法研究进展. 塑料科技, 53(11): 195-201.

康毅力, 张敬逸, 许成元, 等, 2018. 刚性堵漏材料几何形态对其在裂缝中滞留行为的影响. 石油钻探技术, 46(5): 26-34.

李公让, 刘振东, 张敬辉, 等, 2016. 一种含有记忆金属的堵漏剂, CN201611203356.0

李伟, 白英睿, 李雨桐, 等, 2021. 钻井液堵漏材料研究及应用现状与堵漏技术对策. 科学技术与工程, 21(12): 4733-4743.

刘振东, 李海斌, 孙腾飞, 等, 2025. 高激活温度形状记忆发泡材料堵漏性能. 油田化学, 42(3): 388-392.

孙金声, 雷少飞, 白英睿, 等, 2020. 智能材料在钻井液堵漏领域研究进展和应用展望. 中国石油大学学报(自然科学版), 44(4): 100-110.

孙西超, 李艳清, 詹小芳, 等, 2014. 剪切黏稠液体的制备及其性能. 纺织学报, 35(8): 5-9.

谭忠健, 邓津辉, 张向前, 等, 2023. 基于热力耦合分析的火山热膨胀型裂缝定量表征. 地球科学, 48(7): 2665-2677. doi: 10.3799/dqkx.2022.110

汤龙皓, 王彦玲, 张传保, 等, 2022. 基于形状记忆聚合物的温敏型堵漏材料制备与评价. 石油钻探技术, 50(5): 70-75.

颜帮川, 蒋官澄, 胡文军, 等, 2019. 高温延迟交联聚丙烯酰胺凝胶堵漏剂的研究. 钻井液与完井液, 36(6): 679-682.

周浩, 谭柱华, 2021. 石墨烯对剪切增稠液挤压流动力学性能的影响. 材料科学与工艺, 29(1): 66-73.

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(13) / Tables(2)

Get Citation

PDF

XML

Article views (186) PDF downloads(38)

Research on the Shear Thickening Response Characteristics of Intelligent Plugging Drilling Fluid under Solid-Liquid Invasion Conditions

doi: 10.3799/dqkx.2026.102

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Proportional views

Export File

Citation

Format

Content