3D矿床建模技术在数字矿产勘查中的应用

倪平泽; 刘修国; 李超岭; 李丰丹

doi:10.3799/dqkx.2010.054

Volume 35 Issue 3

May 2010

Turn off MathJax

Article Contents

Article Navigation > Earth Science > 2010 > 35(3): 444-452

NI Ping-ze, LIU Xiu-guo, LI Chao-ling, LI Feng-dan, 2010. 3D Ore Deposit Modeling and Application in Digital Mineral Survey. Earth Science, 35(3): 444-452. doi: 10.3799/dqkx.2010.054

Citation:

NI Ping-ze, LIU Xiu-guo, LI Chao-ling, LI Feng-dan, 2010. 3D Ore Deposit Modeling and Application in Digital Mineral Survey. Earth Science, 35(3): 444-452. doi: 10.3799/dqkx.2010.054

NI Ping-ze, LIU Xiu-guo, LI Chao-ling, LI Feng-dan, 2010. 3D Ore Deposit Modeling and Application in Digital Mineral Survey. Earth Science, 35(3): 444-452. doi: 10.3799/dqkx.2010.054

Citation:

NI Ping-ze, LIU Xiu-guo, LI Chao-ling, LI Feng-dan, 2010. 3D Ore Deposit Modeling and Application in Digital Mineral Survey. Earth Science, 35(3): 444-452. doi: 10.3799/dqkx.2010.054

PDF( 363 KB)

3D Ore Deposit Modeling and Application in Digital Mineral Survey

doi: 10.3799/dqkx.2010.054

1.
Faculty of Information Engineering, China University of Geosciences, Wuhan 430074, China
2.
Wuhan Zondycyber Co., Ltd., Wuhan 430074, China
3.
Development and Research Center of China Geological Survey, Beijing 100037, China

Received Date: 2010-01-15
Publish Date: 2010-05-01

Abstract

Abstract

To make up the deficiencies of existing digital ore deposit modeling methods and its applications in mineral survey data managements, a method is advanced for ore deposit modeling in geological mineral survey data management. The method is featured with the following improvement: (1) Original mineral survey data standard informationization; (2) Automatic engineering orebody delineation by multi-confine and comlpex industry index; (3) Orebody joint and extrapolate mode in profile map based on semantic identification; (4) Orebody surface modeling by orebody wireframe model contours in profile map; (5) Orebody spatial attribute modeling by TIN+Octree data structure and geostatistics, and its applications in mineral reserve estimation. So that it can enhance research precision on geological mineral survey and provide the credible orebody model for mining design.
- digital ore deposit modeling,
- automatic orebody delineation,
- orebody surface and attributes modeling

FullText(HTML)

References(39)

References

Bi, L., Wang, L.G., Chen, J.H., et al., 2008. Study of octree-based block model of complex geological bodies. Journal of China University of Mining & Technology, 37(4): 532-537 (in Chinese with English abstract). http://www.researchgate.net/publication/290584691_Study_of_octree-based_block_model_of_complex_geological_bodies

Chen, A.B., Qin, D.X., Zhang, X.S., et al., 2004.3D model for deposit based on MICROMINE technology. Geology and Prospecting, 40(5): 77-80 (in Chinese with English abstract). http://d.wanfangdata.com.cn/Periodical/dzykt200405015

Chen, G.X., Zhang, X.L., Chen, Y.S., 2008. Modeling study of mineral reserves calculation system. China Mine Engineering, 37(3): 33-37 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-YSKS200803015.htm

Christiansen, H.N., Sederberg, T.W., 1978. Conversion of complex contour line definitions into polygonal element mosaics. ACM SIGGRAPH Computer Graphics, 12(3): 187-192. doi: 10.1145/965139.807388

Ekoule, A.B., Peyrin, F.C., Odet, C.L., 1991. A triangulation algorithms from arbitrary shaped multiple planar contours. ACM Transactions on Graphics, 10(2): 182-199. doi: 10.1145/108360.108363

Ganapathy, S., Dennephy, T.G., 1982. A new general triangulation method for planar contours. ACM SIGGRAPH Computer Graphics, 16(3): 69-75. doi: 10.1145/965145.801264

Huang, Y.L., Qin, D.X., Li, L.W., 2007. Status of surpac vision and its application in digital mine. Express Information of Mining Industry, 457: 27-30 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-KYKB200705008.htm

Jiang, H., Qin, D.X., Chen, A.B., et al., 2005. Status and tendency of mining software development at home and abroad. Mineral Resources and Geology, 19(110): 422-425 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-KCYD200504018.htm

Keppel, E., 1975. Approximating complex surfaces by triangulation of contour lines. IBM Journal of Research and Development, 19(1): 2-11. doi: 10.1147/rd.191.0002

Li, C.L., Yang, D.L., Li, F.D., et al., 2008. Basic framework of the digital geological survey system and application of its key technology. Geological Bulletin of China, 27(7): 923-944 (in Chinese with English abstract). http://www.researchgate.net/publication/297089126_Basic_framework_of_the_digital_geological_survey_system_and_application_of_its_key_technology?ev=auth_pub

Li, C.L., Zhang, K.X., Yu, Q.W., et al., 2004. Inherited technique of data model in different stages in digital mapping. Earth Science—Journal of China University of Geosciences, 29(6): 745-752 (in Chinese with English abstract). http://www.researchgate.net/publication/291105529_Inherited_technique_of_data_model_in_different_stages_in_digital_mapping

Liu, H.Y., Liu, X.G., Li, C.L., 2009. Realization and application of 3D reserves estimation system based on geostatistics. Journal of Jilin University (Earth Science Edition), 39(3): 541-546 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-CCDZ200903027.htm

Liu, X.G., Chen, G.L., Hou, W.S., et al., 2006.3D complex geological entity modeling method based on line-frame model. Earth Science—Journal of China University of Geosciences, 31(5): 668-672 (in Chinese with English abstract). http://www.cqvip.com/qk/94035X/200605/22815426.html

Meyers, D., Skinner, S., Sloan, K., 1992. Surfaces from Contours. ACM Transactions on Graphics, 11(3): 228-258. doi: 10.1145/130881.131213

Qi, A.W., Wu, L.X., Hou, N.K., et al., 2001. Introduction of 3D geoscience model and several key issues of its application to mine. China Mining Magazine, 10(5): 61-64 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-ZGKA200105021.htm

Shi, W.Z., Wu, L.X., Li, Q.Q., et al., 2007. Model and algorithms for three dimensional spatial information system. Electronics Industry Press, Beijing (in Chinese).

Wang, R.J., Wang, Y.T., Wang, G.S., et al., 2008. Analysis on the state of the worldwide miner al exploration. Geological Bulletin of China, 27(1): 154-162 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-ZQYD200801017.htm

Wu, J.S., Zhu, G.C., Zeng, X.P., et al., 2004. The research and application of 3D-GIS in solid mineral exploration and mining. Geology and Prospecting, 40(1): 68-72 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-DZKT200401015.htm

Xu, B., Ma, X.G., Tian, Y.P., 2006. Application recursion arithmetic on single engineering orebody delineation. Nonferrous Metals (Mining Section), 58(6): 21-24 (in Chinese with English abstract).

Xu, L., Wu, L.X., Che, D.F., 2007. Strata connection and reference between adjacent boreholes based on stratum sequence and semantics. Geography and Geo-Information Science, 23(1): 1-4 (in Chinese with English abstract). http://www.cqvip.com/Main/Detail.aspx?id=23732457

Zhang, B.Y., Shang, J.G., Wu, H.M., et al., 2007. Application of 3D geological modeling and visualization in solid mineral resource estimation. Geology and Prospecting, 43(2): 76-81 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-DZKT200702016.htm

Zhao, P.D., 2002. "Three-component" quantitative resource prediction and assessments: theory and practice of digital mineral prospecting. Earth Science—Journal of China University of Geosciences, 27(5): 482-489 (in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-DQKX200205001.htm

毕林, 王李管, 陈建宏, 等, 2008. 基于八叉树的复杂地质体块段模型建模技术. 中国矿业大学学报, 37(4): 532-537. doi: 10.3321/j.issn:1000-1964.2008.04.019

陈爱兵, 秦德先, 张学书, 等, 2004. 基于MICROMINE矿床三维立体模型的应用. 地质与勘探, 40(5): 77-80. doi: 10.3969/j.issn.0495-5331.2004.05.015

陈国旭, 张夏林, 陈雅淑, 2008. 固体矿产储量估算系统建模研究. 中国矿山工程, 37(3): 33-37. doi: 10.3969/j.issn.1672-609X.2008.03.012

黄艳丽, 秦德先, 李连伟, 2007. Surpac Vision及其在数字矿山中的应用. 矿业快报, 457: 27-30. https://www.cnki.com.cn/Article/CJFDTOTAL-KYKB200705008.htm

姜华, 秦德先, 陈爱兵, 等, 2005. 国内外矿业软件的研究现状及发展趋势. 矿产与地质, 19(110): 422-425. https://www.cnki.com.cn/Article/CJFDTOTAL-KCYD200504018.htm

李超岭, 杨东来, 李丰丹, 等, 2008. 中国数字地质调查系统的基本构架及其核心技术的实现. 地质通报, 27(7): 923-944. doi: 10.3969/j.issn.1671-2552.2008.07.002

李超岭, 张克信, 于庆文, 等, 2004. 数字填图中不同阶段数据模型的继承技术. 地球科学——中国地质大学学报, 29(6): 745-752. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX200406013.htm

刘海英, 刘修国, 李超岭, 2009. 基于地质统计学法的三维储量估算系统研究与应用. 吉林大学学报(地球科学版), 39(3): 541-546. https://www.cnki.com.cn/Article/CJFDTOTAL-CCDZ200903027.htm

刘修国, 陈国良, 侯卫生, 等, 2006. 基于线框架模型的三维复杂地质体建模方法. 地球科学——中国地质大学学报, 31(5): 668-672. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX200605018.htm

齐安文, 吴立新, 侯恩科, 等, 2001. 三维地学模拟述评及其矿山应用关键问题. 中国矿业, 10(5): 61-64. doi: 10.3969/j.issn.1004-4051.2001.05.019

史文中, 吴立新, 李清泉, 等, 2007. 三维空间信息系统模型与算法. 北京: 电子工业出版社.

王瑞江, 王义天, 王高尚, 等, 2008. 世界矿产勘查态势分析. 地质通报, 27(1): 154-162. doi: 10.3969/j.issn.1671-2552.2008.01.016

吴健生, 朱谷昌, 曾新平, 等, 2004. 三维GIS技术在固体矿产勘探和开发中的研究与应用. 地质与勘探, 40(1): 68-72. doi: 10.3969/j.issn.0495-5331.2004.01.015

徐兵, 马小刚, 田宜平, 2006. 递归算法在单工程矿体边界圈定中的应用. 有色金属(矿山部分), 58(6): 21-24. doi: 10.3969/j.issn.1671-4172.2006.06.007

徐磊, 吴立新, 车德福, 2007. 基于地层时序与属性语义的相邻钻孔地层连接与推理. 地理与地理信息科学, 23(1): 1-4. doi: 10.3969/j.issn.1672-0504.2007.01.001

张宝一, 尚建嘎, 吴鸿敏, 等, 2007. 三维地质建模及可视化技术在固体矿产储量估算中的应用. 地质与勘探, 43(2): 76-81. https://www.cnki.com.cn/Article/CJFDTOTAL-DZKT200702016.htm

赵鹏大, 2002. "三联式"资源定量预测与评价—数字找矿理论与实践探讨. 地球科学——中国地质大学学报, 27(5): 482-489. https://www.cnki.com.cn/Article/CJFDTOTAL-DQKX200205001.htm

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(6) / Tables(3)

Get Citation

PDF

XML

Article views (3728) PDF downloads(93)

3D Ore Deposit Modeling and Application in Digital Mineral Survey

doi: 10.3799/dqkx.2010.054

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Proportional views

Export File

Citation

Format

Content