基于线框架模型的三维复杂地质体建模方法

刘修国; 陈国良; 候卫生; 尚建嘎

基于线框架模型的三维复杂地质体建模方法

中国地质大学信息工程学院，湖北武汉 430074

基金项目:

国家十五“863计划”: 面向网络海量空间信息的大型GIS 2001AA135170

详细信息

作者简介:
刘修国(1969—)，男，教授，博士生导师，主要研究方向为3DGIS、遥感图像处理.E-mail：liuxg@public.wh.hb.cn

中图分类号: P311
计量
- 文章访问数: 4105
- HTML全文浏览量: 494
- PDF下载量: 17
- 被引次数: 0
出版历程
- 收稿日期: 2006-05-30
- 刊出日期: 2006-09-25

3D Complex Geobgical Entity Modeling Method Based on Line-Frame Model

Faculty of Information Engineering, China University of Geosciences, Wuhan 430074, China

摘要

摘要: 提出了一种基于线框架模型的复杂地质体三维建模方法, 在准确表达复杂地质体各要素空间几何形态与相互关系的基础上, 实现地层交错情况下断层面、地层面模型及复杂地质体模型的准确快速构建.建模实践表明: 基于线框架模型的复杂地质体三维建模方法是准确高效的, 能适应常见复杂地质条件下三维复杂地质体模型的构建.
- 线框架模型 /
- 复杂地质体 /
- 三维地质体建模
Abstract: This paper presents a 3D complex geological entity modeling method based on line-frame model, designed to accurately express the spatial geometrical shape of every element of a complex geological entity and their mutual relationship. This method enables the fast construction of a fault model, stratum model, or complex geological entity model in the case of fault interleaving. Proved in modeling practice, this method is an accurate and effective method for constructing a 3D complex geological entity and it can adapt to constructing 3D geological entity model in the case of familiar complex geological conditions.
- line-frame model /
- complex geological entity /
- 3D geological modeling

HTML全文

图 1 数据模型

Fig. 1. Data model

下载: 全尺寸图片幻灯片

图 2 建模流程

Fig. 2. Modeling flow

下载: 全尺寸图片幻灯片

图 3 2个断层面的线框架模型

Fig. 3. Line frame model of two faults

下载: 全尺寸图片幻灯片

图 4 面模型构建示意

a.断层面的线框架模型; b.参数化后的二维线框架模型; c.二维三角网; d.三维断层面三角网

Fig. 4. Sketch map of constructing face model

下载: 全尺寸图片幻灯片

图 5 块体模型构建示意

a.地质实体的线框架模型; b.基于线框架模型构建的所有断层面模型; c.一个地层面所有块体模型

Fig. 5. Sketch map of constructing block model

下载: 全尺寸图片幻灯片

参考文献(13)

Alan, M. L., Norman, L. J., 2003. Building solid models from boreholes and user-defined cross-sections. Computers & Geosciences, 29 (3): 547-555.
Chen, Y., 2003. Digital photogrammetry of remote sensing image. Tongji University Press, Shanghai (in Chinese).
Gong, F. M., 2002.3D geological modeling. Beijing University of Aeronautics and Astronautics[Dissertation], Beijing (in Chinese).
Lu, J., 2002. Systematic identification of polyhedral rock blocks with arbitrary joints and faults. Computers & Geotechnics, 28 (1): 49 -72.
Michael, S. F., 1997. Parametrization and smooth approximation of surface triangulations. Computer Aided Geometric Design, 14 (3): 231-250. doi: 10.1016/S0167-8396(96)00031-3
Nicolos, E., 1998. A newtool to seal a 3D earth model: A cut with constraints. Gocad meeting, [s. n.].
Sirakov, N. M., Muge, F. H., 2001. A systemfor reconstructing and visualising 3D objects. Computers & Geosciences, 27 (1): 59 -69.
Wu, Q., Xu, H., 2005. An effective method for 3D geological modeling with multi-source data integration. Computers & Geosciences, 31 (1): 35 -43.
Zehnder, A. T., All mendinger, R. W., 2000. Velocity field for the trishear model. Journal of Structural Geology, 22 (8): 1009 -1014. doi: 10.1016/S0191-8141(00)00037-7
Zhu, L. F., 2005. Research on key technologies of 3D geological modeling basing on GIS[Dissertation]. China University of Geosciences, Wuhan (in Chinese).
陈鹰, 2003. 遥感影像的数字摄影测量. 上海: 同济大学出版社.
宫法明, 2002. 三维地质建模[学位论文]. 北京: 北京航空航天大学.
朱良峰, 2005. 基于GIS的三维地质建模及可视化系统关键技术研究[学位论文]. 武汉: 中国地质大学.