织构仪控制系统微机改造及视窗化程序设计

UPGRADING OF COMPUTER FOR POLE FIGURE ATTACHMENT CONTROL SYSTEM AND DESIGNING OF WINDOWS95-COMPATIBLE PROGRAM

摘要: 在分析了织构仪结构的基础上, 着重介绍此仪器的改造方法, 包括计算机接口设计、运用于WINDOWS95操作系统中的软件设计, 并充分考虑了系统的安全性和操作的实用性.
- 织构仪 /
- 微机 /
- 接口 /
- 软件设计
Abstract: On the basis of the structural analysis of the pole figure attachment in X-ray diffractometer, this paper presents the method for upgrading this pole figure attachment, including the designing of computer interface and the application of the software program compatible to the WINDOWS95 operating system. In addition, this upgrading method also includes the system safety and the operational convenience.
- pole figure attachment /
- computer /
- interface /
- software programming

图 1 织构仪原理示意图

Fig. 1. Principle sketch of pole figure attachment

下载: 全尺寸图片幻灯片

图 2 织构仪的结构

Fig. 2. Structure of pole figure attachment

下载: 全尺寸图片幻灯片

图 3 主控板

Fig. 3. Major controlling plate

下载: 全尺寸图片幻灯片

图 4 附加板

Fig. 4. Assistant plate

下载: 全尺寸图片幻灯片

图 5 仪器控制及数据采集界面

Fig. 5. Interface of apparatus controlling and data collecting

下载: 全尺寸图片幻灯片

图 6 不同产地样品中石英的(110) 面等值线图和立体极图

Fig. 6. Isogram and pole figure of quartz (110) in samples from different regions

下载: 全尺寸图片幻灯片

表 1 输入输出频率对比

Table 1. Contrast of input and output frequencies

[1]	Rigaku Co Ltd. Instruction manual for goniometer PMG-2 [M]. Tokyo: Rigaku, 1985.
[2]	王士元, 吴芝芳. IBMPC/XT接口技术及应用[M]. 天津: 南开大学出版社, 1990.
[3]	东箭工作室. VISUAL BASIC 5.0中文版程序设计[M]. 北京: 清华大学出版社, 1997.